| Producing Plant : | Bokaro Steel Plant | |
| Specification : | JISG 3101 SS 400; JISG 3132 SPHT 1/2; JISG 3131 SPHC; JIS G - 3116 295 EN 10025 S235 JR/JR G2; S275 JR; S-355 JO; DIN 17100 ST 37.2/ST 44.2; BS 4360 GR. 40/43A; ASTM A 36 / A 569/A 570 GR 33/40; SAE 1006 - SAE 1018 or equivalent. |
|
| Supply Condition : | a) As rolled (through concast route), fully Aluminium Killed with Silicon content of 0.04% max. (optional), not further worked than Hot Rolled, Non-Clad, Non-Plated, Non-Coated, Unoiled, Unpickled, Unskinpassed, Mill Edge Condition, and on the basis of metric system. b) Guarantee of “No Coil Break” is not available since the same depends on decoiling practice at end user’s end as well. c) No Temper Pass facility is available d) Coils are handled in “Eye to the Sky” position at the mill and made Eye Horizontal after receipt at Haldia. e) Coil I.D. - 850 mm. (33½”) (approx.) f) Coil O.D. - 2300 mm. (90½”) max. g) Width / Coil Weight : |
|
|
Width Range in mm.(inch)
|
Coil Weight in metric tonnes
|
|
|
940-1100 (37” - 41”)
Above 1100 - 1250 (41”-49”) Above 1250 - 1525 (48”-60”) Above 1525 - 1600 (60”-63”) Above 1600 - 1829 (63”-72”) |
12-17 |
|
| Rolling Tolerance : (for width and thickness only) | As per specific ordered and mutual agreement. For example typical tolerance on thickness is 2/3 value of JISG 3193 | |
| Packing : | Bare strapped with high tensile straps of minimum 3 numbers through the eye and minimum 3 numbers across the circumference. | |
| Invoicing : | Based on actual net weight mentioned on the outer layer of the coil. | |
| Sizes : |
Thickness in mm. (inch)
|
Width in mm. (inch)
|
|
1.6 (0.063”)
|
940 - 1040 (37” - 41”)
|
|
|
1.8 (0.071”)
|
940 - 1250 (37”-49”)
|
|
|
2.0 (0.079”)
|
940 - 1320 (37”-52”)
|
|
|
>2.0 - 2.9 (0.079” - 0.114”)
|
940 - 1420 (37”-56”)
|
|
|
>2.9 - 4.0 (0.114” - 0.157”)
|
940 - 1600 (37”-63”)
|
|
|
>4.0 - 16.0 (0.157” - 0.63”)
|
940 - 1829 (37”-72”)
|
|
| Markings : | Size/Grade/Coil No./Heat No./Net Wt./Contract No./Made in India | |
| Minimum Order Quantity: | A) Per single width and per grade : 1000 metric tonnes B) Per single Thickness per width : 250 metric tonnes |
|
| Port of Loading : | Haldia Port, India Paradip Port, India |
|
Enquiries for SAIL’s carbon steel products may be sent to :
International Trade Division
Scope Minar Core-2, 17th Floor, LaxmiNagar District Center, Delhi - 110 092, India.
Tel. No. :+91-11-22505358
Fax : +91-11-22507654 , 22514690
E-mail: editd@sail-steel.com